Heavy-Duty Aluminum Railing Series 900/9000 



 


Click here for "Photo Gallery" of Series 900 completed projects

Click here for "Flash Slideshow" of Aluminum completed projects  


 


NEW Series 900/9000 Brochure


 


Series 900-950 Pricing


Series 990 Pricing


Series 9000 Pricing

South Florida Construction Group Series 900 Heavy Duty Aluminum Railings offer the finest of railing design features available on the market today. Highest quality aluminum alloy extrusions are used to provide maximum strength and support where it is needed most - in your installation.

Available in heights from 32" to 48"; optional pool railing  available in heights up to 72"

Series 9000 Heavy-Duty Railing features machined post openings on level and ramp railing, eliminating the need for brackets. The result is a clean, rigid design with added strength. If railing is angled horizontally, the angle must be specified so the proper openings can be machined into the post. Swivel brackets are required for step rail applica­tions. The top rail has a 2” wide gripping surface which meets all safety criteria. The machined post openings and assembled sections (standard 6’ length or custom length) facilitate quick turn-around and overall savings to the customer.

 

Heavy-Duty Aluminum Railing Series 950 


Click here for "Photo Gallery" of Series 950 completed projects


Prices for Series 900/950 Parts Pg 1


Prices for Series 950 "Knocked Down" Kits


Prices for Series 900/950 Parts Pg 2


                                                                                                


South Florida Construction Group railings utilize all the advantages of aluminum-strong, durable, rust and corrosion free. These characteristics make aluminum railings a practical, sound investment for the budget-minded builder. The smart, contemporary design of South Florida Construction Group railing is an added plus. South Florida Construction Group railings are easy to install.


Available in heights from 32" to 48"; optional pool railing available in heights up to 72"

Heavy-Duty Aluminum Railing Series 990


Click here for "Photo Gallery" of Series 990 completed projects


South Florida Construction Group Series 990 Heavy Duty Aluminum Railings offer the finest of railing design features available on the market today. The Series 990 Railing was developed to simulate wood but, has the no-paint, no-maintenance qualities of aluminum.  Available in heights from 32" to 48"; optional pool railing is available in heights up to 72"


Materials

All rails, posts and pickets shall be formed from 6063-T6 extruded aluminum alloys. All railing accessories shall be cast from ANSI 713 alloy. All exposed fasteners used in the system shall be aluminum or stainless steel.

Series 900 railing meets federal safety requirements as determined by an independent testing laboratory. Test results available upon request. South Florida Construction Group Series 900 railing is protected by US Patent #3707276.

Series 900 & 950

The railing system shall consist of 2" or 2-1/2" square posts that can be either base mounted, side mounted or embedded into concrete. The top rail shall be 2" or 2-1/2" wide and the bottom rail a minimum of 1-5/8" wide. Pickets shall be 3/4" square on 4-1/2" or 6" centers, and shall run between the top and bottom rail. The top rail shall be continuous in lengths up to 24'. The railing system will adapt to step railing requirements by specifying a rectangular hole in bottom rail.

Series 990

The railing system shall consist of 2-1/2" square posts that can be either base mounted, side mounted or embedded into concrete. The top rail shall be 2" or 2-1/2" wide and the bottom rail a minimum of 1-5/8" wide. Pickets shall be 1-1/2" x 3/4" on 5-1/4" or 6" centers, and shall run between the top and bottom rail. The top rail shall be continuous in lengths up to 24'. The railing system can meet step railing requirements by specifying the riser and tread dimensions of the steps.

Finishes


Nine smart decorative finishes add an elegant touch of class to all series of railing and custom designed gates. Whether baked-on enamel or anodized, these finishes are guaranteed to endure for years of continued service and maintenance free beauty.

 

Residential Aluminum Railing Series 600 

Click here for "Photo Gallery" of Series 600 completed work


Series 600 Railing Prices
Pg 1


Series 600 Railing Prices
Pg 2


Series 600 Railing Prices
Pg 3

 

 


Custom Aluminum Residential Railing

The South Florida Construction Group Series 600 custom railings offer a wide variety of designs and picket patterns to match the needs of residential or low rise, garden-type apartments. With all the advantages of aluminum – high-strength, durability, and rust free – their low lifetime costs makes them a good investment. Add a South Florida Construction Group Aluminum column, insert, or scroll for just the right detail.

The Series 600 railings are available in heights from 32” to 42” and can be purchased custom-made to your specs or K-D for assembly at the jobsite. Five color choices with baked-on or anodized finishes ensure long lasting beauty while the unique no-weld design allows for simple installation.



Available with Decorative Columns
    (Click to enlarge)

All columns shown are available with 1" Square Extruded Tube by 8" wide overall and in 1-1/2" Square Extruded Tube by 9" wide overall.  The 352/353 designs and 354/355 designs are available in 1-1/2" Square Extruded Tube by 12" wide overall.  Also available with 2" or 2-1/2" square tubing.

Standard columns are fabricated 8ft. high with top and bottom brackets.  Custom heights are available as required.  All are available in baked enamel finishes in any of the nine colors offered for the railings. 

Note:  Designs (352. 353. 354. and 355, marked with an asterisk), are shown with the 12" wide column.
Note:  No. 302 & 303 designs are shown in the 1" Extruded Tube size by 8" wide, however, it is also available in the standard 1-1/2" x 9" size.




Prices for "Knocked Down" Kits

Materials

All rails, posts and pickets shall be formed from 6063-T5 extruded aluminum alloys. All railing accessories shall be cast from ANSI 713 alloy. All exposed fasteners used in the system shall be aluminum or stainless steel.  Series 600 Railing meets federal safety requirements as determined by an independent testing laboratory. Test results available upon request. Reg. Patent No. 3174727.

 Installation

The railing system shall consist of 1-1/2" square posts that can be either base mounted or embedded into concrete. The top rail shall be a minimum of 1-1/2" wide and the bottom rail a minimum of 1-3/8" wide. Pickets shall be 1/2" square on approximately 6", 4", or 3" centers, and shall run between the top and bottom rail. The rail shall be continuous in lengths up to 16'. The railing system will adapt to step railing requirements by specifying a rectangular hole in bottom rail.

Heavy-Duty Aluminum Pipe Railing
Series 500


Sales Brochure of 500 & 550 Railing


Series 500 Railing Prices


Series 550 Railing Prices 


Series 500 Railing Fitting Prices


Click here for "Photo Gallery" of Series 500 completed work
South Florida Construction Group Aluminum Non-welded Series 500 Pipe Railing is especially designed to utilize all the advantages of aluminum, where strength, durability and no-paint maintenance is a key factor. Highest quality aluminum extrusions and castings are used with concealed fasteners, offering a smooth finish, making it the finest contemporary design available on the market today. 

Post and top rails are assembled to run in continuous lengths, this results in a system that is stronger than one with a cast tee and cross connections and provides a continuous smooth top rail surface; pipe rail assemblies up to 24 feet can be shipped factory assembled or knocked down for reassembly.

Heavy-Duty Aluminum Railing
Series 550
 

Click here for "Photo Gallery" of Series 550 completed work
South Florida Construction Group Aluminum Non-Welded Pipe Picket Railing is especially designed to utilize all the advantages of aluminum; where strength, durability and no-paint maintenance is a key factor. Highest quality aluminum extrusions and castings are used with concealed fasteners, offering a smooth finish making it the finest contemporary railing design available on the market today.

Post and top rails are assembled to run in continuous lengths offering a smooth top rail surface, this results in a system that is inherently stronger than one with cross connections; pickets are factory assembled with a tight drive-in-fit to the top and bottom rails to assure square ness and rigidity; preassembled sections are available up to 24' long and can be attached to the required post at the job site.

 
Part  Applications
  (Click to enlarge)

Materials
 

All rails, posts and pickets shall be formed from 6063-T6 aluminum of 1-1/2 Schedule 40 pipe size, except where there are formed elbows, whereby, 6063-T4 is used. All railing accessories shall be cast from ANSI 713 alloy. All fasteners used in the system shall be aluminum or stainless steel.

Workmanship

All pipe cuts shall be square and accurate for minimum joint-gap. Cuts shall be clean and free of chamfer, from deburring, nicks and burrs. Holes shall be drilled the proper size for a tight flush fit of rivets and screws. All posts grouted in concrete must have one 1/4" diameter weep hole, 1/2" above post collar, in the plane of the rail.

Rigidity

Post spacing shall not exceed 6' 0" center-to-center. All posts will be a single unspliced length between posts. All top rails shall be continuous whenever possible. All fasteners shall be tightened so that completed railing is rigid and free of play at joints and component attachments.

Scope of Work

South Florida Construction Group Aluminum Series 500 railing meets federal safety requirements as determined by an independent testing laboratory. Test results available upon request.

Technical Support

For continuous spans in excess of 40 feet, expansion joints should be provided. To make an expansion joint, one end of the spliced joint should not have structural adhesive applied so that it is free to move in or out of the pipe. If a joint is provided every 30 feet, the width of the gap should allow 1/8" expansion for each 40OF of expected temperature rise. All pipe railing splices should be made no more than 12" from the nearest post.

Materials

All rails, posts and pickets shall be formed from 6063-T6 aluminum of 1-1/2 Schedule 40 pipe size, except where there are formed elbows, whereby, 6063-T4 is used. All railing accessories shall be cast from ANSI 713 alloy. All fasteners used in the system shall be aluminum or stainless steel.

Workmanship

All pipe cuts shall be square and accurate for minimum joint-gap. Cuts shall be clean and free of chamfer, from deburring, nicks and burrs. Holes shall be drilled the proper size for a tight flush fit of rivets and screws. All posts grouted in concrete must have one 1/4" diameter weep hole, 1/2" above post collar, in the plane of the rail.

Rigidity

Post spacing shall not exceed 6' 0" center-to-center. All posts will be a single unspliced length between posts. All top rails shall be continuous whenever possible. All fasteners shall be tightened so that completed railing is rigid and free of play at joints and component attachments.

Scope of Work

South Florida Construction Group Aluminum Series 500 railing meets federal safety requirements as determined by an independent testing laboratory. Test results available upon request.

Technical Support

For continuous spans in excess of 40 feet, expansion joints should be provided. To make an expansion joint, one end of the spliced joint should not have structural adhesive applied so that it is free to move in or out of the pipe. If a joint is provided every 30 feet, the width of the gap should allow 1/8" expansion for each 40OF of expected temperature rise. All pipe railing splices should be made no more than 12" from the nearest post.

Durable maintenance-free pipe railing which is quick and easy to install without welding.

 

Railing splices are designed for a tight press fit and must be compressed with a pliers to permit them to slip into the pipe. The areas to be joined should be cleaned thoroughly. Mix adhesive according to manufacture's directions. Mix only enough that you can use within 1/2 hour. Apply adhesive to inside surface of pipe. Compress splice sleeve with a pliers, then slip into the pipe. Wipe off excess adhesive after components are properly joined. The areas connected together should be left undisturbed for eight hours, longer in cold weather. 

Tee Fittings

To attach the tee fitting to the post, a self tapping, stainless steel, hexagon head screw with lock washer is positioned through the fitting and threaded into the tubular post.

When two 90o tees are located directly opposite each other to form a cross, a stainless steel through bolt, lock washer and locknut are used.

Mounting Options

 

Pipe or picket railing can be embedded in concrete and grouted, or mounted on decks and platforms with base flanges, or side-mounted on fascia or stringer by means of fascia flanges.

 

Finishes


Nine smart decorative finishes add an elegant touch of class to all series of railing and custom designed gates. Whether baked-on enamel or anodized, these finishes are guaranteed to endure for years of continued service and maintenance free beauty.

 

Typical Configurations